ACRYLIC CUSHION

Polcoat is a water-based, acrylic binder, 0.5mm-1.0mm thin layer or 1.0mm-2.0mm coarse layer prepared with two types of rubber granules, used to add flexibility to the surface.

Product Features:

Product

Polcoat Cushion

Binding

Acrylic

Minimum Application Temperature

10 ° C

Drying Temperature

1 hour (25 ° C) (2-6 hours should be waited to apply the second layer, and the surface should be observed to be completely dry.)

Color

Grey

Theoretical Consumption Amount

The theoretical consumption of Polcoat Cushion is 350-500 gr / m².
It varies according to the floor temperature and workmanship

Application:

Surface Preparation

The surface on which Polcoat Cushion will be applied must be free from dust, dirt and oil.
There should be no water on the surface.
The floor temperature where Polcoat Cushion will be applied is a minimum of 10 ° C, a maximum of 35 ° C.

Application Procedure

It is applied with a Polcoat Cushion squeegee or squeegee.

Equipment Cleaning

The equipment used is cleaned by washing with water.

Packaging and Consumption:

Packaging: 60 kilograms plastic drum
Consumption: 350-500 g / m2. It varies according to the floor temperature and workmanship