ACRYLIC REPAIR MORTAR

Polcoat Acrylic repair mortar is water-based, acrylic binder, prepared by adding cement, sand and water, and is used to correct defects such as cracks, surface defects, level differences on concrete or asphalt floors.

It is an acrylic flooring product that is used with water, sand, cement to remove the + -5mm corrugations that occur on surfaces such as tennis court flooring, basketball court flooring, volleyball court flooring.

Product Features:

Binder – Acrylic
Minimum Application Temperature – 10C
Drying time – 1 hour (25oC)
Color – White

Application:

Surface Preparation – Surface; free from dust, dirt and grease
should be. There should be no water on the surface.
It is necessary to wait a minimum of 14 days for new asphalt surfaces and a minimum of 28 days for new concrete surfaces.
Surface repair is applied to the surface with a mixture of pure acrylic, cement and sand for hollow areas where water accumulates on both floors and areas at low elevations. Application can be made 1 day after the repair.
Application Conditions – The minimum temperature should be 10C on the ground and the maximum temperature should be 35C. Polcoat Acrylic repair mortar is mixed with water, cement and sand and prepared in the desired consistency by the applicator. The equipment used can be cleaned by washing with water.

Packaging and Consumption:

Mode of Packaging – 5 kilograms plastic bucket