PVC ADHESIVE

It can be applied on PVC-based homogeneous and heterogeneous floor tiles and coatings, linoleum-type natural floor coverings, indoor leveled concrete flooring used for bonding, prefabricated concrete, cement and gypsum-based screeds.

Product Features:

Product description
It is a new generation PVC and linoleum flooring adhesive with acrylic-based, water-based, high adhesion strength.

Usage areas
Hospitals, laboratories, residences, shopping center
• PVC, PU, latex backed floor coverings,
• Marley, marmellyum, linoleum,
• Homogeneous and heterogeneous floor coverings.
Bonding applications coated with PVC, PU and latex
• Flexible and insulated surface coatings with textiles
• On ready flat and absorbent surfaces
• It is used for bonding carpet, covering materials made of PVC to concrete and screed.

Application:

Application Instructions
Surface Quality: The application surface must be cleared of substances that prevent adhesion such as dust, oil, tar, detergent and mold oil. Loose parts in the application area should be removed, the surface should be cleaned with a compressed air compressor or vacuum.

Surface Preparation: If there are voids, swelling and corrugation (corrugation) on the floor, the surface should be leveled by using self leveling. Depending on the ground condition, priming can be done if necessary.

It is applied on the surface with a saw toothed trowel. The consumption is adjusted according to the trowel depth. PVC coating is adhered to the surface within 2 – 3 minutes after it is applied to the surface, without forming an adhesive film layer. After adhesion is achieved, it is adhered well by applying pressure for a short time.

Features and Advantages
• Easy to apply.
Long working range and high strength
• Gives high performance in initial and final adhesion.
• Suitable for underfloor heating floors.
• It is resistant to wheelchair load.

Packaging and Consumption:

In 20 kg plastic bucket packages

It is used at a consumption of 0.5 kg / m²