POLYURETHANE ECO ADHESIVE

It is a two component, solvent free, polyurethane based economic adhesive.

Polcoat Polyurethane Eco Adhesive is a two-component, solvent-free, polyurethane-based economic adhesive. It is used for bonding grass carpet, rubber tiles, rubber rolls and PVC materials.

Product Features:

Color – Various colors
Density – 1.65- 1.70 kg / L
Viscosity – (20oC) 7000-10000 cP
Mixing ratio – (by mass) 22/3
Hardness (Shore A) – 79-83
Application time and temperature – 10-30 min and 10-25 ° C
Touch Dry – 6-8 hours
Heat Resistance – Approximately 100 ° C (Cured product)

Application:

Mixing ratio- 22 kg A and 3 kg B
Mixture Life – 15-40 minutes (Depends on weather and humidity conditions.)
Application Methods – Leveling comb, trowel, spatula or squeegee.
Equipment Cleaning – Ethyl acetate, butyl acetate or cellulosic thinner is used.
Surface Preparation – The floor must be clean, dry, free from dust and oil, repaired, and if it will be applied on concrete, the concrete should be laid at least 22 days before.
Application Conditions – There should be no moisture, dust, dirt, rust and oil on the application surface.
All of the mixed material should be consumed within the period of use.
Application Procedure – It is recommended to follow the rules below during the application.
22 kg of A component and 3 kg of B component should be mixed with a slow speed mixer for at least 2 minutes. All of the materials should be used without splitting.
The cover should be tightly closed after the hardener is used all at once.
A toothed trowel should be used to apply the adhesive.
It should be protected from water for 8-10 hours.

Packaging and Consumption:

Package – 22 + 3 kg (metal)