HEAT RESISTANT PAINT

It is a one component, physically drying, silicone resin based, 600 degree heat resistant metal paint. If desired, it can be produced as a corrosion resistant product. It is a paint product resistant to 750 ° heat, which is used to obtain a high resistance on surfaces in contact with its high temperature.

Product Features:

Color Black
Density 1.27 kg / l
Solid Matter % 52 ± 1
Viscosity 530 ± 20 cP

Application:

Application Methods By roller, brush or spray applicable. Apply and touch after drying 1 It should be kept at 120 ° C for hours.
Equipment Cleaning can be done with Thinner
Surface Preparation Clean the surface from oil and grease with a suitable detergent. Wash surfaces contaminated with dirt, dust, salt and mud with high pressure fresh water. Remove moisture.
Application Conditions During the application, make sure that the surface is thoroughly free from dirt, oil and grease. Before applying the last layer on surfaces that remain in a dirty environment for a long time, the surface must be cleaned and then painted. In order to prevent the moisture in the air from condensing on the surface, the surface temperature must be at least 3 ° C higher than the dew temperature of the air. During the application, the air temperature should be between 5 ° C – 45 ° C.
Application Procedure It is recommended to follow the rules below during the application.

Before use, the equipment should be cleaned with a suitable thinner. Paint must be mixed before application. Mixing should be done at regular intervals during use to ensure homogeneity. If applied in closed areas, adequate ventilation should be provided. It should be cured at 120 ° C for 1 hour after it is touch dry.

Packaging and Consumption:

Packaging – 20/25 kg metal