EPOXY REPAIR MORTAR

It is an epoxy based, fast curing and high adherence solvent free, two component, high filled resin.

It is a solvent-free, epoxy-based repair mortar. It has excellent adhesion on concrete, screed and iron and has high pressure, bending and adherence values. It is resistant to water, mineral oils, gasoline, many acids and alkalis. It is resistant to thermal effects and abrasion.

Product Features:

Density : ~ 1.80 g / cm3 (20 ° C)
Mixture usage time : ~ 40 min.
Drying Time: ~ 24 hours (20 ° C)
Touch time : ~ 6 hours
Full Setup Time : ~ 7 days
Pressure Resistance : 90-96 N / mm2 (7 days, 20 ° C)
Flexural Strength : ~ 30 N / mm2
Tensile Strength (Direct) : ~ 17 N / mm2
Adherence (concrete) : ~ 5 N / mm2

Application:

By opening a hole in appropriate sizes on the concrete to be anchored and filling POLCOAT EPOXY REPAIR MORTAR.
irons are placed. Before the concrete is poured into the anchored sections, you should wait 3 days, which is the preliminary curing time of the anchorage paste. With POLCOAT EPOXY REPAIR MORTAR , steel elements to be used in the sheathing system can be fixed to columns and beams. It is necessary to clean the opened holes with a compressor. First of all, 5.00 kg of component A (resin) is mixed with the help of 0.50 kg hardener drill until it becomes homogeneous and it is made ready to use. Prepared mixture for 40 min. It is used within the period of use. The application is done under pressure with a single head injection pump or manually by putting it into a sausage gun. At the end of the application, the injection machine should be cleaned with cellulosic thinner. Brush and equipment cleaning can be done with epoxy thinner.

Packaging and Consumption:

PACKAGING SHAPE
5,00 kg A component
0.50 kg B component