Clicky

ACRYLIC CUSHION SYSTEM FLOOR COVERING – POLCOAT

ACRYLIC CUSHION SYSTEM FLOOR COVERING

It is one of the water-based acrylic flooring systems designed for tennis, basketball and volleyball courts. The system consists of primer, acrylic resurfacer, acrylic cushion and acrylic top coat.

 

Product Features:

Primary

50-110 gr / m2

Acrylic Resurfacer

400-750 gr / m2; mixing ratio: 25-40% water; 50-60% sand; 28000 cP; 1.28 kg / L

Acrylic Topcoat Paint

Layer 500-600 gr / m2; 50-60% sand; 30% water; 35200 cP; 1.29 kg / L

Layer 250-350 gr / m2; 10-20% sand; 5-10% water; 35200 cP; 1.29 kg / L

Acrylic Line Paint

100-150 gr / m2; 30% water;

 

Application:

Surface Preparation

The floor must be clean, dry, free from oil and dust and repaired.

Method of Application

Primer is first applied with a roller to the surface that is cleaned of all kinds of dirt and dust. The coating to be created with the primer retains the moisture coming from the floor. Thus, swelling that may occur on the ground is prevented. After complete drying, acrylic resurfacer mixed with 25-40% water and 50-60% silica sand is applied. Resurfacer is used to fill gaps on the surface and to create a smooth surface. Kenncoat acrylic top coat is mixed with 50-60% sand and 30% water for the first coat, and the second coat is applied with 10-20% sand and 5-10% water with a squeegee or a 60 cm wide squeegee. The amount of water required may vary depending on the temperature. Before the application, the field lines should be determined with paper tape. Kenncoat acrylic line paint is prepared by mixing with 30% water. Acrylic line paint is mixed with water until it reaches a slightly dark but easily flowing consistency with an electric drill and applied with a roller.

Application Conditions

Acrylic materials should be used at a temperature of 10-35 ° C. Otherwise, early drying or freezing problems may occur during application. Water, sand and paint mixtures should be mixed very well homogeneously. Mixing should be repeated each time before applying to prevent sand settling.

 

Packaging and Consumption:

The paint inside is 75 kg Resurfacer and 75 kg Primer is stored in 220 kg packages.

It should be consumed in the recommended storage and usage conditions.

12 months at temperatures between 5 ° C and 35 ° C, provided that it is stored in a dry environment.