ACRYLIC PRIMARY

Polcoat Acrylic primer is a water-based, acrylic binder, applied by sprinkling with silica sand, used to prevent moisture on concrete or asphalt floors and to increase the adhesion of other top layers to the surface. Polcoat Acrylic primer is a water-based, acrylic binder, applied by sprinkling with silica sand, used to prevent moisture on concrete or asphalt floors and to increase the adhesion of other top layers to the surface

Product Features:

Binder – Acrylic
Minimum Application Temperature -10 C
Drying time -1 hour (25 C)

It should be waited 2-6 hours to apply the second coat, and the surface should be observed to be completely dry.
Color – White

Application:

Surface preparation – free from dust, dirt and grease
should be. There should be no water on the surface.
It is necessary to wait a minimum of 14 days for new asphalt surfaces and a minimum of 28 days for new concrete surfaces.
Surface repair is applied to the surface with a mixture of pure acrylic, cement and sand for hollow areas where water accumulates on both floors and areas at low elevations. Application can be made 1 day after the repair.
Application Conditions – The minimum temperature should be 10C on the ground and the maximum temperature should be 35C. Kenncoat Acrylic primer is mixed with water and sand and applied with a squeegee or squeegee. The equipment used is cleaned by washing with water.

Packaging and Consumption:

Packaging : In 20 KG-75KG-200KG Packages
Consumption : 0.2-0.3 KG / M2