EPOXY TOPCOAT PAINT

It is an epoxy-based, two-component, solvent-free paint and coating material that can be applied to floors and walls. It has high adhesion strength. It is hygienic and easy to clean. It is an epoxy paint that is resistant to mechanical loads, abrasion and chemicals.

• Easy to apply
• Flexible and durable even at low temperatures
• Solvent free, no fire risk
• Excellent adhesion to the substrate
• No stitches or joints
• Waterproof
• Crack bridging
• Color matching can be
• Easy to clean
• Does not slip during spreading
• Excellent abrasion resistance

Used as a smooth finish for flooring

• Industrial floors subject to light loads
• Food and beverage industry (Wet areas)
• Hygienic areas
• Shopping malls
• Textile industry
• Treatment facilities

Product Features:

Part A: High viscosity Liquid
Part B : Low Viscosity Brown Liquid
Density Part A : 1.42 kg / approx.
Viscozite : 1500 cP (25 ° C)

Application:

Mixing
Mix Part A thoroughly with an electric mixer before grouping. Add Component B to the correct mixture, take the ratio and mix at low speed (300-450 rpm) for 2-3 minutes until thoroughly mixed. If anti-slip properties are required, the required amount of Component C (10% in A + B component).
homogeneous consistency is obtained.
Application
Apply in an even layer on the floor using a notched trowel or spreader. Use a smaller tile trowel or spreader to the edges of the floors. Caution: Uncured material reacts in contact with water.
(foaming). During application, care should be taken not to drip sweat onto fresh KENNCOAT EPOXY TOP COAT (wear head and wrist bands). For the priming system, please refer to the relevant Technical Data Sheet.

Packaging and Consumption:

A + B = 18.4 kg