OUTDOOR SELF LEVELLING

Double Component

Self-leveling antistatic

Waterproof

Chemical and abrasion resistant

It is a coating material used to give flexibility to the floor.

It is a two-component, solvent-free, polyurethane-based, self-leveling, anti-static material used in outdoor applications.

Product Features:

Color- Various colors
Density – 1.15-1.17 kg / L
Viscosity (23C) – 2000-2500 cP
Mixing ratio (by mass) – 5/4
Hardness (Shore A) – 65-70
Application time and temperature – 10-30 min and 10-25 ° C
Touch Dry – 6-8 hours
Heat Resistance – Approximately 100 ° C (Cured product)

Application:

Mixing ratio- 5 kg A and 4 kg B
Mixture Life – 15-40 minutes (Depends on weather and humidity conditions.)
Application Methods – Squeegee or trowel
Equipment Cleaning – Ethyl acetate, butyl acetate or cellulosic thinner is used.
Surface Preparation – The floor must be clean, dry, free from dust and oil, repaired, and if it will be applied on concrete, the concrete should be laid at least 22 days ago.
Application Conditions – There should be no moisture, dust, dirt, rust and oil on the application surface.
All of the mixed material should be consumed within the period of use.
Application Procedure – It is recommended to follow the rules below during the application.
22.5 parts of A component and 18 parts of B component should be mixed with a slow speed mixer for at least 2 minutes. All of the materials should be used without splitting.
The cover should be tightly closed after the hardener is used all at once.
Squeegee or trowel should be used for application.
It should be protected from water for 8-10 hours.

Packaging and Consumption:

450 kg metal drums in packaging sets