TIXOTROPIC SURFACE EPOXY SELF LEVELLING

Epoxy-based, two-component, high viscosity, solvent-free, colored, orange-patterned, multi-purpose coating material.It has an orange-patterned appearance and is used on floors where a rough surface is desired.

Used as a textured topcoat for flooring.

• Industrial floors subject to light loads
• Food and beverage industry (Wet areas)
• Hygienic areas
• Shopping malls
• Textile industry
• Treatment facilities

Product Features:

Part A: High viscosity Liquid
Part B: Low Viscosity Brown Liquid
Density Part A: 1.42 kg / approx.
Viscozite: 1300 cP (25 ° C)

Consumption:
Primer: KENNCOAT EPOXY PRIMER / KENNCOAT PU-PRIMER 2K 0.3 – 0.5kg / m²
Broadcast: KENNCOAT EPOXY SELF LEVELLING (A + B) 2.0 kg / m²
Top Coat: KENNCOAT EPOXY TOPCOAT (A + B) 0,3-0,4 kg / m²

Application:

Covering
Top Coat: Top Coat (0.2-0.8 mm thick)
Primer: KENNCOAT EPOXY PRIMER or KENNCOAT PU-PRIMER 2K (Comp. A + B)
Broadcast: KENNCOAT EPOXY SELF LEVELLING (Comp. A + B)
Top Coat: KENNCOAT EPOXY TOPCOAT Comp.A + B)

Mixing
Mix Part A thoroughly with an electric mixer before grouping. Add Component B to the correct mixture, take the ratio and mix at low speed (300-450 rpm) for 2-3 minutes until thoroughly mixed. If anti-slip properties are required, the required amount of Component C (10% in A + B component).
homogeneous consistency is obtained.

Application
Apply it to the floor in an even layer using a zero trowel or spreader. With the coral roller, go over it after 15-20 minutes to create a texture effect. Caution: Uncured material reacts in contact with water (foaming). During application, care should be taken not to drip sweat onto fresh KENNCOAT EPOXY TOP COAT (wear head and wrist bands). For the priming system, please refer to the relevant Technical Data Sheet.

Application Limits

• Do not apply when the surface temperature is above the dew point of 3 ° C.
• Minimum surface temperature + 10 ° C.
• Maximum surface temperature + 25 ° C.
• Maximum relative humidity 70%.

Packaging and Consumption:

Metal tin: 19 kg (A + B)